What is an air cooler for oil cooling?

An air cooler for oil cooling is a heat exchanger that removes heat from oil by transferring it to ambient air. A fan is commonly used to provide airflow across the finned heat-transfer surface.

When should an air-cooled oil cooler be used instead of a water-cooled oil cooler?

Air cooling can be considered when cooling water is unavailable, difficult to supply, undesirable for the equipment, or when an independent air-based heat-rejection system is preferred. For mobile mining and large engineering equipment, the difficulty of connecting and continuously supplying cooling water can be an important reason for considering oil-to-air cooling.

Can an air cooler be used for turbine lube oil?

Yes. An air-cooled oil cooler can be designed for turbine lubrication oil when the required heat duty, oil temperature, pressure drop, ambient conditions and installation requirements are suitable.

Can an air cooler be used for generator seal oil?

Yes. Air-cooled heat exchangers can be considered for generator seal oil cooling when the thermal duty and system requirements are suitable. The actual oil flow, inlet temperature, required outlet temperature and allowable pressure drop should be provided for design evaluation.

Can an air cooler be used for diesel generator engine oil?

Yes. An air-cooled oil cooler can be used for diesel engine oil cooling when the required cooling capacity and operating conditions are within the design range.

Can an air cooler cool compressor lubrication oil?

Yes. Compressor lubrication oil cooling is a common industrial application. The cooler should be selected according to the compressor oil flow, operating temperature, pressure and required heat removal.

Can an air cooler be used for pump lubrication oil?

Yes. Air-cooled oil coolers can be designed for lubrication systems serving pumps and other rotating equipment. The cooler should be matched to the oil circulation rate, thermal duty and allowable pressure drop.

Can an air cooler cool thermal oil?

Yes. Thermal oil can be cooled by an air-cooled heat exchanger when the required heat duty, fluid properties, operating temperature and ambient conditions are suitable.

Can an air-cooled oil cooler be used for mining equipment?

Yes. Air-cooled oil coolers can be used for many mining and large engineering equipment applications, including hydraulic oil, gear oil and lubrication oil cooling. For mining environments, dust, vibration, ambient temperature, airflow and cleaning requirements should be considered during the design stage.

How do you select the right air cooler for oil cooling?

The initial design normally requires information such as oil type, oil flow rate, oil inlet temperature, required oil outlet temperature, maximum ambient temperature, operating pressure, allowable pressure drop, available installation space, fan power supply and environmental conditions.

Can you provide a customized air cooler for oil cooling?

Yes. Project-specific air coolers can be designed according to the customer's oil properties, flow rate, operating temperatures, ambient conditions, pressure-drop requirements, installation dimensions and equipment configuration.

Getting started
Fin Tube Extrusion

Fin Tube Extrusion - Manufacturers, Factory, Suppliers from China

We retain improving upon and perfecting our items and repair. At the same time, we perform actively to do research and progress for Fin Tube Extrusion, Brazed Plate Heat Exchanger , Electric Heat Exchanger , Aluminum Tube Heat Exchanger ,Inside Finned Tube . Your inquiry will be highly welcomed and a win-win prosperous development are what we are expecting. The product will supply to all over the world, such as Europe, America, Australia,Argentina, Roman,Lithuania, Korea.Our Company has qualified engineers and technical staff to answer your questions about maintenance problems, some common failure. Our product quality assurance, price concessions, any questions about the items, Be sure to feel free to contact us.

Related Products

laser-welded-finned-tubes — Laser Welded Finned Tubes | 10–273 mm Base Tube OD for Industrial Heat Exchangers
Read More

extruded-finned-tube — Steel-Aluminum Extruded Finned Tube Manufacturing Process & Specifications | Bimetallic DR Type

Laser-Welded-finned-tube-coil — Finned Tube Coil | Laser Welded and Extruded Fin Tube Coils

custom-aluminum-finned-tube-for-air-cooler — Aluminum Finned Tube | High-Efficiency Aluminum Fin Tube for Fin Fan Coolers

air-cooled-condenser — Fishing Vessel Air-Cooled Condenser | Marine Finned Tube Solution

air-heater — Steam / Hot Oil / Thermal Fluid Air Heater | Custom Finned Tube Air Heating Solutions

u-serrated-fin-tube-for-heat-exchanger — Serrated Fin Tube with U-Shape Serrations | High Efficiency Finned Tube for Heat Exchangers

Top Selling Products

Related Blog
Related Videos
Reviews

L Finned Tube The Thermal Efficiency Higher

The strip material is subjected to controlled deformation under tension giving the optimum contact pressure of the foot of the fin onto the base tube thus maximising the heat transfer properties. T...
High Frequency Welding Finned Tube

Sprial Welding Finned Tube High frequency welded spiral finned tubes are generally used for petrochemical industry and mostly installed on the convection sections of fired heaters, waste heat boile...
Air Fin Cooler--Silent Heat Shifters: How Industry Stays Cool Without Water

Air Fin Cooler Silent Heat Shifters: How Industry Stays Cool Without Water Walk through any refinery or power plant, and you’ll see towering arrays resembling giant radiators. These ...
Fin Fan Coolers: The Industrial Giants Keeping Processes Chill

Walk through any refinery, power plant, chemical processing facility, or large manufacturing site, and you’ll likely see rows of imposing structures resembling oversized radiators. These are ...
LL Spiral Type Carbon Steel Tube Aluminum Fins For Heating Radiators

Bare tube general material: Aluminum,Copper, Alloy, Carbon Steel, Stainless Steel. Bare tube OD: 16-63mm. Fin general material: Copper, Aluminum. Fin pitch: 2.1-5.0mm. Fin height: <17mm. Fin thi...
Wide Range Of Uses For H And HH Type Fin Tube

Bare tube general material: Alloy, Carbon Steel, Stainless Steel Bare tube OD: 25-63mm Fin general material: Alloy, Carbon Steel, Stainless Steel Fin pitch: 8-30mm Fin height: <200mm Fin thickne...

Fin Tube Extrusion Related Videos From Youtube

Honorio 2022.04.01 13:51:19
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
Kama 2021.12.25 09:17:41
Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
Betty 2021.09.01 06:10:52
This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
Claire 2021.08.23 16:59:49
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
Alva 2021.08.15 12:21:57
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
Belinda 2021.06.22 07:39:44
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!

Fin Tube Extrusion - Manufacturers, Factory, Suppliers from China

Related Products

Laser Welded Finned Tubes | 10–273 mm Base Tube OD for Industrial Heat Exchangers

Steel-Aluminum Extruded Finned Tube Manufacturing Process & Specifications | Bimetallic DR Type

Finned Tube Coil | Laser Welded and Extruded Fin Tube Coils

Aluminum Finned Tube | High-Efficiency Aluminum Fin Tube for Fin Fan Coolers

Fishing Vessel Air-Cooled Condenser | Marine Finned Tube Solution

Steam / Hot Oil / Thermal Fluid Air Heater | Custom Finned Tube Air Heating Solutions

Serrated Fin Tube with U-Shape Serrations | High Efficiency Finned Tube for Heat Exchangers

Top Selling Products

L-Foot Finned Tubes: The Comprehensive Selection Guide for Optimal Thermal Performance

U-Shaped Finned Tubes:Boost Industrial Performance with High-Efficiency

Premium Copper Inner Finned Tubes for Ingersoll Rand Centac Coolers: Engineering Excellence and Global Reliability

Bent Finned Tubes: Optimizing Heat Transfer for Complex Spaces

G Type Finned Tube(Embedded Finned Tube)

Low Fin Tube (Integrally Rolled Type)

Mastering Heat Exchange: A Guide to Finned Tube Heat Exchanger Banks

Elliptical Fin Tube With Rectangular Fins Oval Tube

Custom Inner Finned Tubes for Centrifugal Compressor Intercoolers – Perfect Fit for Ingersoll Rand Air Compressors

High Frequency Welded Finned Tube

Extruded Fin Tube Machine

KL Type Fin Tube (Knurled Finned Tube): The Ultimate Guide for High-Efficiency Heat Transfer

L Finned Tube The Thermal Efficiency Higher

High Frequency Welding Finned Tube

Air Fin Cooler--Silent Heat Shifters: How Industry Stays Cool Without Water

Fin Fan Coolers: The Industrial Giants Keeping Processes Chill

LL Spiral Type Carbon Steel Tube Aluminum Fins For Heating Radiators

Wide Range Of Uses For H And HH Type Fin Tube

Fin Tube Extrusion Related Videos From Youtube

Honorio 2022.04.01 13:51:19

Kama 2021.12.25 09:17:41

Betty 2021.09.01 06:10:52

Claire 2021.08.23 16:59:49

Alva 2021.08.15 12:21:57

Belinda 2021.06.22 07:39:44

related search