Wide Range Of Uses For H And HH Type Fin Tube

Bare tube general material: Alloy, Carbon Steel, Stainless Steel

Bare tube OD: 25-63mm

Fin general material: Alloy, Carbon Steel, Stainless Steel

Fin pitch: 8-30mm

Fin height: <200mm

Fin thickness: 1.5-3.5mm

H type fin tube
STUDDEN FIN TUBE

H fins pipe (square finned tube)

Square finned tube also called H fins is made for recovery of power station boiler, industry boiler, industrial furnace, ship power equipment, which can effectively improve the utilization rate of fuel and arrange the strong heat transfer components in the tail flue of the system.

Due to the low temperature flue gas convection heat transfer - that is, the characteristics of flue gas on the tube wall of exothermic coefficient a1 is much smaller than soda side wall is exothermic coefficient a2, it is necessary to adopt extended heating surface in the flue gas side. Nowadays what used on the boiler is economizer ( also called a economizer), which has the types as follows: a light tube, screw up plate, cast iron finned tube type, the membrane wall tube type, etc. In addition to the light tube, the rest are extended surface structure.

In the structure design, Fins pipe adopted a separate structure for the easy to knot of pipe gray parts, which overcomes problem that the spiral tube easy to dust, ash, and the defect of gas resistance, and which is the improved product of spiral finned tube.


Post time: May-05-2022