News

  • High Frequency Welding Finned Tube

    High Frequency Welding Finned Tube

    Sprial Welding Finned Tube High frequency welded spiral finned tubes are generally used for petrochemical industry and mostly installed on the convection sections of fired heaters, waste heat boilers, economizers, air preheaters, and...
    Read more
  • U Bend Heat Exchangers Tube

    U Bend Heat Exchangers Tube

    Applications U Bend Tubes for Heat Exchangers applied mostly in oil & gas plants, chemical & petrochemical plants, refineries, power plants, renewable energy plants. U Bending Tube Standa...
    Read more
  • Wrinkle Finned Tube For Shell And Tube Exchanger

    Wrinkle Finned Tube For Shell And Tube Exchanger

    Fin Materials: Aluminum, Copper Tube Materials: No limits Fin Thickness: Min: 300 µ Max: 800µ Fin Height:0.5″ to 0.75″ The Wrinkle Fin attachment is a surface variation to the Edge Tension fin tube. This enhanceme...
    Read more
  • LL Spiral Type Carbon Steel Tube Aluminum Fins For Heating Radiators

    LL Spiral Type Carbon Steel Tube Aluminum Fins For Heating Radiators

    Bare tube general material: Aluminum,Copper, Alloy, Carbon Steel, Stainless Steel. Bare tube OD: 16-63mm. Fin general material: Copper, Aluminum. Fin pitch: 2.1-5.0mm. Fin height: <17mm. Fin thickness: 0.4mm. L...
    Read more
  • Aluminum Heat G Type Embedded Fin Tube For Air Cooler

    Aluminum Heat G Type Embedded Fin Tube For Air Cooler

    Tube: Carbon steel, Alloy steel, stainless steel and dual-phase steel Fin: Aluminum/Copper, Al1060/1070/1100, etc Bare tube OD: 16-63mm. Fin general material: Copper, Aluminum. Fin pitch: 2.1-5.0mm. Fin height: <17mm. Fin thickness: 0.4mm. ...
    Read more
  • L Finned Tube The Thermal Efficiency Higher

    L Finned Tube The Thermal Efficiency Higher

    The strip material is subjected to controlled deformation under tension giving the optimum contact pressure of the foot of the fin onto the base tube thus maximising the heat transfer properties. The foot of the fin considerably enhances the corrosi...
    Read more
  • KL-type Finned Tube Is Also Called The Knurling Finned Tube

    KL-type Finned Tube Is Also Called The Knurling Finned Tube

    KL finned tube Bare tube general material: Copper, Alloy, Carbon Steel, Stainless Steel Bare tube OD: 16-63mm Fin general material: Copper, Aluminum Fin pitch: 2.1-5.0mm Fin height: <17mm Fin thickness: ~0.4mm ...
    Read more
  • Studed Fin Tube Can Improve The Heat Transfer Coefficient Of Flue Gas Side

    Studed Fin Tube Can Improve The Heat Transfer Coefficient Of Flue Gas Side

    Bare tube OD:48-124mm Studded Tube (Pin tube) Studded tube is also known as the head tube screw ribbed tube. Studded tube is more widely used in the petrochemical industry. Especially, in order to strengthen the heat transfer effect in the outside of the tube, Studded tu...
    Read more
  • The Advantages Of HF Spiral Welding Fin Tube

    The Advantages Of HF Spiral Welding Fin Tube

    Bare tube general material: Alloy, Carbon Steel, Stainless Steel Bare tube OD: 16-219mm Fin general material: Alloy, Carbon Steel, Stainless Steel Fin pitch: 3-25mm Fin height: 5-30mm Fin thickness: 0.8-3mm ...
    Read more
  • Wide Range Of Uses For H And HH Type Fin Tube

    Wide Range Of Uses For H And HH Type Fin Tube

    Bare tube general material: Alloy, Carbon Steel, Stainless Steel Bare tube OD: 25-63mm Fin general material: Alloy, Carbon Steel, Stainless Steel Fin pitch: 8-30mm Fin height: <200mm Fin thickness: 1.5-3.5mm ...
    Read more
  • Carbon Steel,Copper,Stainless Steel U-bend Tube

    Carbon Steel,Copper,Stainless Steel U-bend Tube

    Bare tube general material: Carbon Steel, Copper, Stainless Steel Bare tube OD: 16-38mm As the both ends fixed on the same tube sheet, the shell and the tube are separated so the U-type heat exchange can not thermal expanse, and the tube bundle can ...
    Read more
  • String Type Fin Tube (Elliptical)

    String Type Fin Tube (Elliptical)

    Bare tube general material: Copper, Aluminum, Carbon Steel, Stainless Steel Bare tube OD: 25-38mm Fin general material: Copper, Alloy, Aluminum, Carbon Steel, Stainless Steel Fin pitch: 2.1-3.5mm Fin height: <20mm Fin thickness: 0.2-0.5mm ...
    Read more
12 Next > >> Page 1 / 2