Product News
-
The advantages of finned tubes
Transferring heat from a hot fluid into a colder fluid through a tube wall is the reason many of us use finned tubes. But you may ask, what is the major advantage of using a finned tube? Why can’t you just use a regular tube to make this transfer? Well you can but the ra...Read more -
High Frequency Welding Finned Tube
Sprial Welding Finned Tube High frequency welded spiral finned tubes are generally used for petrochemical industry and mostly installed on the convection sections of fired heaters, waste heat boilers, economizers, air preheaters, and...Read more -
U Bend Heat Exchangers Tube
Applications U Bend Tubes for Heat Exchangers applied mostly in oil & gas plants, chemical & petrochemical plants, refineries, power plants, renewable energy plants. U Bending Tube Standa...Read more -
L Finned Tube The Thermal Efficiency Higher
The strip material is subjected to controlled deformation under tension giving the optimum contact pressure of the foot of the fin onto the base tube thus maximising the heat transfer properties. The foot of the fin considerably enhances the corrosi...Read more -
KL-type Finned Tube Is Also Called The Knurling Finned Tube
KL finned tube Bare tube general material: Copper, Alloy, Carbon Steel, Stainless Steel Bare tube OD: 16-63mm Fin general material: Copper, Aluminum Fin pitch: 2.1-5.0mm Fin height: <17mm Fin thickness: ~0.4mm ...Read more -
Studed Fin Tube Can Improve The Heat Transfer Coefficient Of Flue Gas Side
Bare tube OD:48-124mm Studded Tube (Pin tube) Studded tube is also known as the head tube screw ribbed tube. Studded tube is more widely used in the petrochemical industry. Especially, in order to strengthen the heat transfer effect in the outside of the tube, Studded tu...Read more -
The Advantages Of HF Spiral Welding Fin Tube
Bare tube general material: Alloy, Carbon Steel, Stainless Steel Bare tube OD: 16-219mm Fin general material: Alloy, Carbon Steel, Stainless Steel Fin pitch: 3-25mm Fin height: 5-30mm Fin thickness: 0.8-3mm ...Read more -
Wide Range Of Uses For H And HH Type Fin Tube
Bare tube general material: Alloy, Carbon Steel, Stainless Steel Bare tube OD: 25-63mm Fin general material: Alloy, Carbon Steel, Stainless Steel Fin pitch: 8-30mm Fin height: <200mm Fin thickness: 1.5-3.5mm ...Read more -
Carbon Steel,Copper,Stainless Steel U-bend Tube
Bare tube general material: Carbon Steel, Copper, Stainless Steel Bare tube OD: 16-38mm As the both ends fixed on the same tube sheet, the shell and the tube are separated so the U-type heat exchange can not thermal expanse, and the tube bundle can ...Read more -
String Type Fin Tube (Elliptical)
Bare tube general material: Copper, Aluminum, Carbon Steel, Stainless Steel Bare tube OD: 25-38mm Fin general material: Copper, Alloy, Aluminum, Carbon Steel, Stainless Steel Fin pitch: 2.1-3.5mm Fin height: <20mm Fin thickness: 0.2-0.5mm ...Read more -
Extruded Fin Tube With Excellent Heat Transfer Properties And Longevity
This fin type is formed from a bi-metallic tube consisting of an aluminium outer tube and an inner tube of almost any material. The fin is formed by rolling material from the outside of the exterior tube to give an integral fin with excellent heat transfer properties and...Read more