What is an air cooler for oil cooling?

An air cooler for oil cooling is a heat exchanger that removes heat from oil by transferring it to ambient air. A fan is commonly used to provide airflow across the finned heat-transfer surface.

When should an air-cooled oil cooler be used instead of a water-cooled oil cooler?

Air cooling can be considered when cooling water is unavailable, difficult to supply, undesirable for the equipment, or when an independent air-based heat-rejection system is preferred. For mobile mining and large engineering equipment, the difficulty of connecting and continuously supplying cooling water can be an important reason for considering oil-to-air cooling.

Can an air cooler be used for turbine lube oil?

Yes. An air-cooled oil cooler can be designed for turbine lubrication oil when the required heat duty, oil temperature, pressure drop, ambient conditions and installation requirements are suitable.

Can an air cooler be used for generator seal oil?

Yes. Air-cooled heat exchangers can be considered for generator seal oil cooling when the thermal duty and system requirements are suitable. The actual oil flow, inlet temperature, required outlet temperature and allowable pressure drop should be provided for design evaluation.

Can an air cooler be used for diesel generator engine oil?

Yes. An air-cooled oil cooler can be used for diesel engine oil cooling when the required cooling capacity and operating conditions are within the design range.

Can an air cooler cool compressor lubrication oil?

Yes. Compressor lubrication oil cooling is a common industrial application. The cooler should be selected according to the compressor oil flow, operating temperature, pressure and required heat removal.

Can an air cooler be used for pump lubrication oil?

Yes. Air-cooled oil coolers can be designed for lubrication systems serving pumps and other rotating equipment. The cooler should be matched to the oil circulation rate, thermal duty and allowable pressure drop.

Can an air cooler cool thermal oil?

Yes. Thermal oil can be cooled by an air-cooled heat exchanger when the required heat duty, fluid properties, operating temperature and ambient conditions are suitable.

Can an air-cooled oil cooler be used for mining equipment?

Yes. Air-cooled oil coolers can be used for many mining and large engineering equipment applications, including hydraulic oil, gear oil and lubrication oil cooling. For mining environments, dust, vibration, ambient temperature, airflow and cleaning requirements should be considered during the design stage.

How do you select the right air cooler for oil cooling?

The initial design normally requires information such as oil type, oil flow rate, oil inlet temperature, required oil outlet temperature, maximum ambient temperature, operating pressure, allowable pressure drop, available installation space, fan power supply and environmental conditions.

Can you provide a customized air cooler for oil cooling?

Yes. Project-specific air coolers can be designed according to the customer's oil properties, flow rate, operating temperatures, ambient conditions, pressure-drop requirements, installation dimensions and equipment configuration.

Professional Design Finned Tube Baseboard - H Type Finned Tube Rectangular Finned Tubes – Datang

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for Spine Fin Tubing , Finned Tube Enclosure , Ll Finned Tube , At present, company name has more than 4000 kinds of products and gained good reputation and big shares on market domestic and overseas.

Professional Design Finned Tube Baseboard - H Type Finned Tube Rectangular Finned Tubes – Datang Detail:

● H type finned tube specifications

● Tube OD: 25-73mm

● Tube Thk: 3.0-6.0mm

● Fin Thk: 1.5-4.0mm

● Fin Pitch: 9.0-30.0mm

● Fin Height: 15.0-45.0mm

H finned tubes are widely used in utility boilers, industrial boilers, Marine power, tail of heat exchangers, economizers or waste incinerators for coal and oil installations etc.

H-economizer two rectangular fin, similar to a square, its edge length for the fluorescent tubes of 2-fold, an expansion of the heating surface.

Max. Working Temperature: 300 °C

Atmospheric Corrorsion Resisitance: OK

Mechanical Resistance: Good

Fin Material: Copper, Aluminum, carbon steel, stainless steel

Base Tube materials: Any material available, such as Carbon steel Tube, A179, A192, A210, stainless tube A269/A213 T5 T11 T22 304 316

High_Frequency_Welding_Finned_Tube
2020082677175153

Single pipe square finned tubes and twin pipe rectangular finned tubes are also manufactured as per customers’ requirements. These are particularly suitable for dust laden exhaust gases, e.g. for economizers in coal and oil fired units or waste incinerators.

Product detail pictures:

Related Product Guide:

"Sincerity, Innovation, Rigorousness, and Efficiency" will be the persistent conception of our company to the long-term to establish together with customers for mutual reciprocity and mutual gain for Professional Design Finned Tube Baseboard - H Type Finned Tube Rectangular Finned Tubes – Datang , The product will supply to all over the world, such as: Sheffield, Doha, Cairo, We have advanced production technology, and pursuit innovative in products. At the same time, the good service has enhanced the good reputation. We believe that as long as you understand our product, you must be willing to become partners with us. Looking forward to your inquiry.

Customized Bend Extruded Finned Tube