What is an air cooler for oil cooling?

An air cooler for oil cooling is a heat exchanger that removes heat from oil by transferring it to ambient air. A fan is commonly used to provide airflow across the finned heat-transfer surface.

When should an air-cooled oil cooler be used instead of a water-cooled oil cooler?

Air cooling can be considered when cooling water is unavailable, difficult to supply, undesirable for the equipment, or when an independent air-based heat-rejection system is preferred. For mobile mining and large engineering equipment, the difficulty of connecting and continuously supplying cooling water can be an important reason for considering oil-to-air cooling.

Can an air cooler be used for turbine lube oil?

Yes. An air-cooled oil cooler can be designed for turbine lubrication oil when the required heat duty, oil temperature, pressure drop, ambient conditions and installation requirements are suitable.

Can an air cooler be used for generator seal oil?

Yes. Air-cooled heat exchangers can be considered for generator seal oil cooling when the thermal duty and system requirements are suitable. The actual oil flow, inlet temperature, required outlet temperature and allowable pressure drop should be provided for design evaluation.

Can an air cooler be used for diesel generator engine oil?

Yes. An air-cooled oil cooler can be used for diesel engine oil cooling when the required cooling capacity and operating conditions are within the design range.

Can an air cooler cool compressor lubrication oil?

Yes. Compressor lubrication oil cooling is a common industrial application. The cooler should be selected according to the compressor oil flow, operating temperature, pressure and required heat removal.

Can an air cooler be used for pump lubrication oil?

Yes. Air-cooled oil coolers can be designed for lubrication systems serving pumps and other rotating equipment. The cooler should be matched to the oil circulation rate, thermal duty and allowable pressure drop.

Can an air cooler cool thermal oil?

Yes. Thermal oil can be cooled by an air-cooled heat exchanger when the required heat duty, fluid properties, operating temperature and ambient conditions are suitable.

Can an air-cooled oil cooler be used for mining equipment?

Yes. Air-cooled oil coolers can be used for many mining and large engineering equipment applications, including hydraulic oil, gear oil and lubrication oil cooling. For mining environments, dust, vibration, ambient temperature, airflow and cleaning requirements should be considered during the design stage.

How do you select the right air cooler for oil cooling?

The initial design normally requires information such as oil type, oil flow rate, oil inlet temperature, required oil outlet temperature, maximum ambient temperature, operating pressure, allowable pressure drop, available installation space, fan power supply and environmental conditions.

Can you provide a customized air cooler for oil cooling?

Yes. Project-specific air coolers can be designed according to the customer's oil properties, flow rate, operating temperatures, ambient conditions, pressure-drop requirements, installation dimensions and equipment configuration.

High Quality Tube Finning - Stainless Steel Alloy Steel Serrated Finned Tube – Datang

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

Our pursuit and company intention is usually to "Always fulfill our purchaser requirements". We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for Exhaust Heat Exchanger , Heat Exchangers Are , Plate Fin Heat Exchanger Pdf , We believe in quality over quantity. Before export of the hair there is strict quality control check during treatment as per international quality standards.

High Quality Tube Finning - Stainless Steel Alloy Steel Serrated Finned Tube – Datang Detail:

● Higher heat transfer coefficient. The serrate can make the gas flow across the fins freely, enhancing the turbulent motion and improving the heat transfer effect. Researches show that serrated fin tube’s heat transfer efficiency is about 15-20% higher than common solid fin tube.

● Reduce metal consume. Due to the higher heat transfer coefficient, for the same amount of heat, serrated fin tube is with less heat transfer areas, which help reduce the metal consume.

● Anti-ash-deposition and anti-scaling. Due to the serrate, it is very hard for the serrated fin tube to deposit the ash and scaling.

● It is more flexible to adapt to the changes of gas flow direction.

● The important features of this configuration are efficient, effective bond of fin to tube under all conditions of temperature and pressure, and ability to withstand high fin side temperatures. This serrated fin configuration is even better to withstand the fin fouling if that is a problem in the application. This gives better heat transfer properties compared to solid fins

High_Frequency_Welding_Finned_Tube2

Base Tube Details

1. Tube Diameter: 20 mm OD Min to 219 mm OD Max.

2. Tube Thickness: Minimum 2 mm up to 16mm.

3. Tube Material: Carbon Steel, Stainless Steel, Alloy Steel, Corten steel, duplex Steel, Super Duplex Steel, Inconel, High Chrome High Nickle & Incolloy, CK 20 material and some other material.

Fin Details

1. Fins Thickness: Min. 0.8 mm to Max. 4 mm.

2. Fins Height: Min 0.25” (6.35 mm) To Max.1.5” (38 mm).

3. Fin Density : Min 43 Fins per Meter to Max. 287 Fins per Meter.

4. Material: Carbon Steel, Stainless Steel, Alloy Steel, Carton steel, Duplex Steel.

Product detail pictures:

Related Product Guide:

We have been ready to share our knowledge of advertising worldwide and recommend you suitable products at most aggressive costs. So Profi Tools present you ideal price of money and we've been ready to create with each other with High Quality Tube Finning - Stainless Steel Alloy Steel Serrated Finned Tube – Datang , The product will supply to all over the world, such as: Kenya, America, Panama, We have been making our products for more than 20 years . Mainly do wholesale , so we have the most competitive price , but highest quality. For the past years , we got very good feedbacks , not only because we provide good products , but also because of our good after-sale service . We are here waiting for you for your inquiry.

Bend Tube Steel

Copper Tube Heat Exchanger

Drying Finned Tube

Fin And Tube Type Condenser

Fin Tube Condenser

Finned Tube Coil Heat Exchangers

A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.

By Nancy from kazan - 2017.09.09 10:18

As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!

By Frederica from Boston - 2018.06.28 19:27

Write your message here and send it to us