What is an air cooler for oil cooling?

An air cooler for oil cooling is a heat exchanger that removes heat from oil by transferring it to ambient air. A fan is commonly used to provide airflow across the finned heat-transfer surface.

When should an air-cooled oil cooler be used instead of a water-cooled oil cooler?

Air cooling can be considered when cooling water is unavailable, difficult to supply, undesirable for the equipment, or when an independent air-based heat-rejection system is preferred. For mobile mining and large engineering equipment, the difficulty of connecting and continuously supplying cooling water can be an important reason for considering oil-to-air cooling.

Can an air cooler be used for turbine lube oil?

Yes. An air-cooled oil cooler can be designed for turbine lubrication oil when the required heat duty, oil temperature, pressure drop, ambient conditions and installation requirements are suitable.

Can an air cooler be used for generator seal oil?

Yes. Air-cooled heat exchangers can be considered for generator seal oil cooling when the thermal duty and system requirements are suitable. The actual oil flow, inlet temperature, required outlet temperature and allowable pressure drop should be provided for design evaluation.

Can an air cooler be used for diesel generator engine oil?

Yes. An air-cooled oil cooler can be used for diesel engine oil cooling when the required cooling capacity and operating conditions are within the design range.

Can an air cooler cool compressor lubrication oil?

Yes. Compressor lubrication oil cooling is a common industrial application. The cooler should be selected according to the compressor oil flow, operating temperature, pressure and required heat removal.

Can an air cooler be used for pump lubrication oil?

Yes. Air-cooled oil coolers can be designed for lubrication systems serving pumps and other rotating equipment. The cooler should be matched to the oil circulation rate, thermal duty and allowable pressure drop.

Can an air cooler cool thermal oil?

Yes. Thermal oil can be cooled by an air-cooled heat exchanger when the required heat duty, fluid properties, operating temperature and ambient conditions are suitable.

Can an air-cooled oil cooler be used for mining equipment?

Yes. Air-cooled oil coolers can be used for many mining and large engineering equipment applications, including hydraulic oil, gear oil and lubrication oil cooling. For mining environments, dust, vibration, ambient temperature, airflow and cleaning requirements should be considered during the design stage.

How do you select the right air cooler for oil cooling?

The initial design normally requires information such as oil type, oil flow rate, oil inlet temperature, required oil outlet temperature, maximum ambient temperature, operating pressure, allowable pressure drop, available installation space, fan power supply and environmental conditions.

Can you provide a customized air cooler for oil cooling?

Yes. Project-specific air coolers can be designed according to the customer's oil properties, flow rate, operating temperatures, ambient conditions, pressure-drop requirements, installation dimensions and equipment configuration.

Getting started
Heat Exchanger Ac Unit

Heat Exchanger Ac Unit - China Factory, Suppliers, Manufacturers

Our goal is to satisfy our customers by offering golden service, good price and high quality for Heat Exchanger Ac Unit, Double H Type Finned Tube , Cooling Fin Tube , Finned Cooling Tubes ,Finned Tube Heat Exchanger Calculations . In case you pursuit the Hi-quality, Hi-stable, Aggressive price elements, corporation name is your greatest choice! The product will supply to all over the world, such as Europe, America, Australia,Hanover, Bahrain,Czech republic, Slovenia.You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We will provide our best service to satisfy all your needs! You should contact us right away!

Related Products

laser welded fin tube machine — Laser Welded Finned Tube Production Line for Heat Exchanger Manufacturing | Exported to Russia and Turkey
Read More

economizer — Specialized Manufacture of Heat Exchanger Custom Service

u-serrated-fin-tube-for-heat-exchanger — Serrated Fin Tube with U-Shape Serrations | High Efficiency Finned Tube for Heat Exchangers

Extruded-finned-tube — Extruded Finned Tubes | High Efficiency Bimetallic Aluminum Fin Tubes for Heat Exchangers

serrated-fin-tube-structure — Serrated Fin Tube (Knurled Fin Tube) for High-Efficiency Heat Exchangers

spiral wound finned tube — G-Type Embedded vs. Spiral-Wound L, LL, and KL Knurled Finned Tubes: How to Choose the Right Heat Exchanger Solution

tube heat exchagners — Case Study: Optimizing Oil Heating for Kazakhstan’s Petrochemical Industry with Custom Finned Tube Exchangers

Top Selling Products

Related Blog
Related Videos
Reviews

High Frequency Welding Finned Tube

Sprial Welding Finned Tube High frequency welded spiral finned tubes are generally used for petrochemical industry and mostly installed on the convection sections of fired heaters, waste heat boile...
Finned Tube Air Coolers: Efficient Industrial Heat Dissolution

Finned Tube Air Coolers: Efficient Industrial Heat Dissolution Finned tube air coolers (FTACs) are engineered heat exchangers that transfer process heat to ambient air using finned tu...
Air Fin Cooler--Silent Heat Shifters: How Industry Stays Cool Without Water

Air Fin Cooler Silent Heat Shifters: How Industry Stays Cool Without Water Walk through any refinery or power plant, and you’ll see towering arrays resembling giant radiators. These ...
Aluminum Heat G Type Embedded Fin Tube For Air Cooler

Tube: Carbon steel, Alloy steel, stainless steel and dual-phase steel Fin: Aluminum/Copper, Al1060/1070/1100, etc Bare tube OD: 16-63mm. Fin general material: Copper, Aluminum. Fin pitch: 2.1-5.0mm...
Wrinkle Finned Tube For Shell And Tube Exchanger

Fin Materials: Aluminum, Copper Tube Materials: No limits Fin Thickness: Min: 300 µ Max: 800µ Fin Height:0.5″ to 0.75″ The Wrinkle Fin attachment is a surface variation to the Edge Tension fin tub...
String Type Fin Tube (Elliptical)

Bare tube general material: Copper, Aluminum, Carbon Steel, Stainless Steel Bare tube OD: 25-38mm Fin general material: Copper, Alloy, Aluminum, Carbon Steel, Stainless Steel Fin pitch: 2.1-3.5mm F...

Heat Exchanger Ac Unit Related Videos From Youtube

Prudence 2022.10.20 18:34:46
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
Roberta 2022.09.27 01:05:39
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
Michelle 2020.11.11 00:49:56
Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
Florence 2020.06.04 04:29:12
Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
Donna 2019.10.20 03:51:51
This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
Edwina 2019.10.11 14:48:10
It can be said that this is a best producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.

Heat Exchanger Ac Unit - China Factory, Suppliers, Manufacturers

Related Products

Laser Welded Finned Tube Production Line for Heat Exchanger Manufacturing | Exported to Russia and Turkey

Specialized Manufacture of Heat Exchanger Custom Service

Serrated Fin Tube with U-Shape Serrations | High Efficiency Finned Tube for Heat Exchangers

Extruded Finned Tubes | High Efficiency Bimetallic Aluminum Fin Tubes for Heat Exchangers

Serrated Fin Tube (Knurled Fin Tube) for High-Efficiency Heat Exchangers

G-Type Embedded vs. Spiral-Wound L, LL, and KL Knurled Finned Tubes: How to Choose the Right Heat Exchanger Solution

Case Study: Optimizing Oil Heating for Kazakhstan’s Petrochemical Industry with Custom Finned Tube Exchangers

Top Selling Products

GROOVED FIN TUBE OR ‘G’ FIN TUBE (EMBEDDED FIN TUBE )

Boiler Energy Saving Device

Copper Finned Tubes,Pure Copper Composite Finned Tube

High Frequency Welded Fin Tube for Air Dry

High frequency serrated finned tube

Studded Finned Tube Energy-Efficient Heat Exchange Component

Finned tube heat exchanger

Mastering High Temperatures: The Essential Guide to G-Fin Embedded Finned Tubes

ASTM A179 U Bend Heat Exchangers Tube

Fin Tube Collar Support|Pipe Hoop for Finned Tube

90/10 Cupronickel Tubes

Laser Welding Finned Tube For Heat Exchanger

High Frequency Welding Finned Tube

Finned Tube Air Coolers: Efficient Industrial Heat Dissolution

Air Fin Cooler--Silent Heat Shifters: How Industry Stays Cool Without Water

Aluminum Heat G Type Embedded Fin Tube For Air Cooler

Wrinkle Finned Tube For Shell And Tube Exchanger

String Type Fin Tube (Elliptical)

Heat Exchanger Ac Unit Related Videos From Youtube

Prudence 2022.10.20 18:34:46

Roberta 2022.09.27 01:05:39

Michelle 2020.11.11 00:49:56

Florence 2020.06.04 04:29:12

Donna 2019.10.20 03:51:51

Edwina 2019.10.11 14:48:10

related search