What is an air cooler for oil cooling?

An air cooler for oil cooling is a heat exchanger that removes heat from oil by transferring it to ambient air. A fan is commonly used to provide airflow across the finned heat-transfer surface.

When should an air-cooled oil cooler be used instead of a water-cooled oil cooler?

Air cooling can be considered when cooling water is unavailable, difficult to supply, undesirable for the equipment, or when an independent air-based heat-rejection system is preferred. For mobile mining and large engineering equipment, the difficulty of connecting and continuously supplying cooling water can be an important reason for considering oil-to-air cooling.

Can an air cooler be used for turbine lube oil?

Yes. An air-cooled oil cooler can be designed for turbine lubrication oil when the required heat duty, oil temperature, pressure drop, ambient conditions and installation requirements are suitable.

Can an air cooler be used for generator seal oil?

Yes. Air-cooled heat exchangers can be considered for generator seal oil cooling when the thermal duty and system requirements are suitable. The actual oil flow, inlet temperature, required outlet temperature and allowable pressure drop should be provided for design evaluation.

Can an air cooler be used for diesel generator engine oil?

Yes. An air-cooled oil cooler can be used for diesel engine oil cooling when the required cooling capacity and operating conditions are within the design range.

Can an air cooler cool compressor lubrication oil?

Yes. Compressor lubrication oil cooling is a common industrial application. The cooler should be selected according to the compressor oil flow, operating temperature, pressure and required heat removal.

Can an air cooler be used for pump lubrication oil?

Yes. Air-cooled oil coolers can be designed for lubrication systems serving pumps and other rotating equipment. The cooler should be matched to the oil circulation rate, thermal duty and allowable pressure drop.

Can an air cooler cool thermal oil?

Yes. Thermal oil can be cooled by an air-cooled heat exchanger when the required heat duty, fluid properties, operating temperature and ambient conditions are suitable.

Can an air-cooled oil cooler be used for mining equipment?

Yes. Air-cooled oil coolers can be used for many mining and large engineering equipment applications, including hydraulic oil, gear oil and lubrication oil cooling. For mining environments, dust, vibration, ambient temperature, airflow and cleaning requirements should be considered during the design stage.

How do you select the right air cooler for oil cooling?

The initial design normally requires information such as oil type, oil flow rate, oil inlet temperature, required oil outlet temperature, maximum ambient temperature, operating pressure, allowable pressure drop, available installation space, fan power supply and environmental conditions.

Can you provide a customized air cooler for oil cooling?

Yes. Project-specific air coolers can be designed according to the customer's oil properties, flow rate, operating temperatures, ambient conditions, pressure-drop requirements, installation dimensions and equipment configuration.

Chinese Professional Fin Tubes Mfg Co - G Type Embedded Spiral Finned Tube – Datang

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Ground Heat Exchanger , Spine Fin Tubing , Fin Tube Types , Our professional technical team will be wholeheartedly at your service. We sincerely welcome you to visit our website and company and send us your inquiry.

Chinese Professional Fin Tubes Mfg Co - G Type Embedded Spiral Finned Tube – Datang Detail:

● Bare tube general material: Copper, Alloy, Carbon Steel, Stainless Steel

● Bare tube OD: 16-63mm

● Fin general material: Aluminum

● Fin pitch: 2.1-5.0mm

● Fin height: <17mm

● Fin thickness: ~0.4mm

G type1
G TYPE

G type embedded spiral finned tube is processed from a certain width in the steel pipe and spiral groove depth, then inlays the ribbon on the steel pipe by the equipment. In winding process, as the pre-tightening force to a certain extent so the strip will be firmly in the spiral groove, to ensure there is a certain contact area between steel band and steel pipe. In order to prevent the strip spring falling off the light tube, the two ends of the steel strip need to weld onto the steel pipe. In order to set easily, there should be a certain clearance between steel belt and spiral groove. If the clearance is too small the setting process will be difficult to proceed smoothly. In addition, the steel belt of winding there will always be a certain amount of rebound, which makes it cannot very good joint among the steel belt and spiral groove bottom. Inlaid fins can be conducted on general equipment, and they cost little. Mcelroy companies in the United States the company I used the advanced production equipment, slotting embedding technology is advanced, from stable, embedded and firm, pulled off force not less than 70 n, the allowable temperature can reach 400 ℃, has the strong ability of temperature resistance and thermal shock, widely used in petrochemical air cooler.

Product detail pictures:

Related Product Guide:

Good quality comes to start with; service is foremost; organization is cooperation" is our enterprise philosophy which is regularly observed and pursued by our firm for Chinese Professional Fin Tubes Mfg Co - G Type Embedded Spiral Finned Tube – Datang , The product will supply to all over the world, such as: Las Vegas, Roman, French, Make sure you genuinely feel free to send us your requirements and we are going to respond for you asap. We now have got a skilled engineering group to serve for your just about every detailed needs. Cost-free samples could be sent to suit your needs personally to understand much more information. In an effort to meet your requires, be sure to seriously feel free to make contact with us. You may send us emails and contact us directly. Moreover, we welcome visits to our factory from around the globe for much better recognizing of our organization. nd objects. In our trade with merchants of numerous countries, we usually adhere for the principle of equality and mutual benefit. It is really our hope to market, by joint efforts, each trade and friendship to our mutual advantage. We look forward to getting your inquiries.

Bending Stainless Tube

Embedded Finned Tube

Fin Tube Machine

Finned-Tube Evaporator Coils

Flat Tube Heat Exchanger

Hydronic Fin Tube

Integrally Finned Tubes

Low Fin Tube Machine

Micro Fin Tube

Slant Fin Tube

The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.

By Mandy from Berlin - 2018.06.19 10:42

The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.

By Eve from Botswana - 2017.06.16 18:23

Write your message here and send it to us