What is an air cooler for oil cooling?

An air cooler for oil cooling is a heat exchanger that removes heat from oil by transferring it to ambient air. A fan is commonly used to provide airflow across the finned heat-transfer surface.

When should an air-cooled oil cooler be used instead of a water-cooled oil cooler?

Air cooling can be considered when cooling water is unavailable, difficult to supply, undesirable for the equipment, or when an independent air-based heat-rejection system is preferred. For mobile mining and large engineering equipment, the difficulty of connecting and continuously supplying cooling water can be an important reason for considering oil-to-air cooling.

Can an air cooler be used for turbine lube oil?

Yes. An air-cooled oil cooler can be designed for turbine lubrication oil when the required heat duty, oil temperature, pressure drop, ambient conditions and installation requirements are suitable.

Can an air cooler be used for generator seal oil?

Yes. Air-cooled heat exchangers can be considered for generator seal oil cooling when the thermal duty and system requirements are suitable. The actual oil flow, inlet temperature, required outlet temperature and allowable pressure drop should be provided for design evaluation.

Can an air cooler be used for diesel generator engine oil?

Yes. An air-cooled oil cooler can be used for diesel engine oil cooling when the required cooling capacity and operating conditions are within the design range.

Can an air cooler cool compressor lubrication oil?

Yes. Compressor lubrication oil cooling is a common industrial application. The cooler should be selected according to the compressor oil flow, operating temperature, pressure and required heat removal.

Can an air cooler be used for pump lubrication oil?

Yes. Air-cooled oil coolers can be designed for lubrication systems serving pumps and other rotating equipment. The cooler should be matched to the oil circulation rate, thermal duty and allowable pressure drop.

Can an air cooler cool thermal oil?

Yes. Thermal oil can be cooled by an air-cooled heat exchanger when the required heat duty, fluid properties, operating temperature and ambient conditions are suitable.

Can an air-cooled oil cooler be used for mining equipment?

Yes. Air-cooled oil coolers can be used for many mining and large engineering equipment applications, including hydraulic oil, gear oil and lubrication oil cooling. For mining environments, dust, vibration, ambient temperature, airflow and cleaning requirements should be considered during the design stage.

How do you select the right air cooler for oil cooling?

The initial design normally requires information such as oil type, oil flow rate, oil inlet temperature, required oil outlet temperature, maximum ambient temperature, operating pressure, allowable pressure drop, available installation space, fan power supply and environmental conditions.

Can you provide a customized air cooler for oil cooling?

Yes. Project-specific air coolers can be designed according to the customer's oil properties, flow rate, operating temperatures, ambient conditions, pressure-drop requirements, installation dimensions and equipment configuration.

2021 New Style Corrugated Fin Tube - G Type Embedded Spiral Finned Tube – Datang

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

Innovation, excellent and reliability are the core values of our company. These principles today much more than ever form the basis of our success as an internationally active mid-size business for Finned Steel Tube , Plate Fin Tube , Hydraulic Heat Exchanger , Striving hard to attain continual success determined by high quality, reliability, integrity, and complete understanding of current market dynamics.

2021 New Style Corrugated Fin Tube - G Type Embedded Spiral Finned Tube – Datang Detail:

● Bare tube general material: Copper, Alloy, Carbon Steel, Stainless Steel

● Bare tube OD: 16-63mm

● Fin general material: Aluminum

● Fin pitch: 2.1-5.0mm

● Fin height: <17mm

● Fin thickness: ~0.4mm

G type1
G TYPE

G type embedded spiral finned tube is processed from a certain width in the steel pipe and spiral groove depth, then inlays the ribbon on the steel pipe by the equipment. In winding process, as the pre-tightening force to a certain extent so the strip will be firmly in the spiral groove, to ensure there is a certain contact area between steel band and steel pipe. In order to prevent the strip spring falling off the light tube, the two ends of the steel strip need to weld onto the steel pipe. In order to set easily, there should be a certain clearance between steel belt and spiral groove. If the clearance is too small the setting process will be difficult to proceed smoothly. In addition, the steel belt of winding there will always be a certain amount of rebound, which makes it cannot very good joint among the steel belt and spiral groove bottom. Inlaid fins can be conducted on general equipment, and they cost little. Mcelroy companies in the United States the company I used the advanced production equipment, slotting embedding technology is advanced, from stable, embedded and firm, pulled off force not less than 70 n, the allowable temperature can reach 400 ℃, has the strong ability of temperature resistance and thermal shock, widely used in petrochemical air cooler.

Product detail pictures:

Related Product Guide:

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" as well as the theory of "quality the basic, have confidence in the very first and management the advanced" for 2021 New Style Corrugated Fin Tube - G Type Embedded Spiral Finned Tube – Datang , The product will supply to all over the world, such as: Croatia, British, Czech Republic, As a way to use the resource on the expanding info in international trade, we welcome prospects from everywhere on the web and offline. In spite on the high quality objects we offer you, effective and satisfying consultation service is supplied by our qualified after-sale service group. Item lists and in depth parameters and any other info weil be sent to you timely for the inquiries. So you should make contact with us by sending us emails or call us when you've got any questions about our organization. ou could also get our address information from our site and come to our enterprise. We get a field survey of our merchandise. We're confident that we are going to share mutual accomplishment and create solid co-operation relations with our companions within this market place. We're seeking forward for your inquiries.

Boiler Tube Fins

Copper Fin Tube Radiators

Fin Tube Coil

Fin Tubes Mfg Co

Finned Pipe Heat Exchanger

Finned Pipe Radiator

Heat Exchanger Tube Cleaning

Steel And Tube Aluminium

Tube And Fin Radiator

Tubes And Bends

The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.

By Nicole from India - 2018.09.23 18:44

The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!

By Sahid Ruvalcaba from Irish - 2018.06.26 19:27

Write your message here and send it to us