2021 China New Design Studded Finned Tube - G Type Embedded Spiral Finned Tube – Datang
2021 China New Design Studded Finned Tube - G Type Embedded Spiral Finned Tube – Datang Detail:
● Bare tube general material: Copper, Alloy, Carbon Steel, Stainless Steel
● Bare tube OD: 16-63mm
● Fin general material: Aluminum
● Fin pitch: 2.1-5.0mm
● Fin height: <17mm
● Fin thickness: ~0.4mm
G type embedded spiral finned tube is processed from a certain width in the steel pipe and spiral groove depth, then inlays the ribbon on the steel pipe by the equipment. In winding process, as the pre-tightening force to a certain extent so the strip will be firmly in the spiral groove, to ensure there is a certain contact area between steel band and steel pipe. In order to prevent the strip spring falling off the light tube, the two ends of the steel strip need to weld onto the steel pipe. In order to set easily, there should be a certain clearance between steel belt and spiral groove. If the clearance is too small the setting process will be difficult to proceed smoothly. In addition, the steel belt of winding there will always be a certain amount of rebound, which makes it cannot very good joint among the steel belt and spiral groove bottom. Inlaid fins can be conducted on general equipment, and they cost little. Mcelroy companies in the United States the company I used the advanced production equipment, slotting embedding technology is advanced, from stable, embedded and firm, pulled off force not less than 70 n, the allowable temperature can reach 400 ℃, has the strong ability of temperature resistance and thermal shock, widely used in petrochemical air cooler.
Product detail pictures:
Related Product Guide:
Being supported by an innovative and experienced IT team, we could present technical support on pre-sales & after-sales service for 2021 China New Design Studded Finned Tube - G Type Embedded Spiral Finned Tube – Datang , The product will supply to all over the world, such as: South Africa, Manchester, Canada, We'll initiate the second phase of our development strategy. Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. If you are interested in any of our products and solutions or would like to discuss a custom order, make sure you feel free to contact us. We've been looking forward to forming successful business relationships with new clients around the world in the near future.
By Nancy from Karachi - 2018.12.28 15:18
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
By Ida from luzern - 2017.08.16 13:39