Featured
-
Factory Price For Copper Heat Exchanger Tubes - Sprial Welding Finned Tube(Helical Finned Tubes) – Datang
Helical Finned Tubes provide the designer with high thermal efficiency and compact design solutions for a whole range of heat exchangers where clean flue gases are encountered. Helical finned Tubes are manufactured in both Solid and Serrated win profiles. Helical Solid Finned Tubes are produced by helically wrapping continuous fin strip tube. The fin strip is wounded spirally onto the tube and welded continuously with a High Frequency Electrical process to the tube along the spiral root. The ... -
Good Wholesale Vendors Double Wall Heat Exchanger - ASTM A179 U Bend Heat Exchangers Tube – Datang
● ASTM A179/ ASME SA179; ● ASTM A213/ ASME SA 213, T11, T22, T22, T5; ● ASTM A213/ ASME SA213, TP304/304L, TP316/316L, S31803, S32205, S32750, S32760, TP410; ● ASTM B111, C44300, C68700, C70600, C71500; ● ASTM B338, GR.1, GR.2. ● Monel Alloys. ● Nickel Alloys. ● U Bend Dimension capability. ● Tube OD.: 12.7mm-38.1mm. ● Tube Thickness: 1.25mm-6mm. ● Bending Radius: Min.1.5 x OD/ Max. 1250mm. ● U tube Straight “leg” Length: Max. 12500mm. ● Straight tube before U bending: Max. 27000mm. U Bend Tu... -
Hot Selling for Annular Finned Tube - ASTM A179 U Bend Heat Exchangers Tube – Datang
● ASTM A179/ ASME SA179; ● ASTM A213/ ASME SA 213, T11, T22, T22, T5; ● ASTM A213/ ASME SA213, TP304/304L, TP316/316L, S31803, S32205, S32750, S32760, TP410; ● ASTM B111, C44300, C68700, C70600, C71500; ● ASTM B338, GR.1, GR.2. ● Monel Alloys. ● Nickel Alloys. ● U Bend Dimension capability. ● Tube OD.: 12.7mm-38.1mm. ● Tube Thickness: 1.25mm-6mm. ● Bending Radius: Min.1.5 x OD/ Max. 1250mm. ● U tube Straight “leg” Length: Max. 12500mm. ● Straight tube before U bending: Max. 27000mm. U Bend Tu... -
Reliable Supplier Finned Tube Heat Exchanger - Stainless Steel Alloy Steel Serrated Finned Tube – Datang
● Higher heat transfer coefficient. The serrate can make the gas flow across the fins freely, enhancing the turbulent motion and improving the heat transfer effect. Researches show that serrated fin tube’s heat transfer efficiency is about 15-20% higher than common solid fin tube. ● Reduce metal consume. Due to the higher heat transfer coefficient, for the same amount of heat, serrated fin tube is with less heat transfer areas, which help reduce the metal consume. ● Anti-ash-deposition and an... -
Short Lead Time for Finned Radiator Tube - Aluminum Copper Alloys Extruded Finned Tube – Datang
Every single member from our large efficiency revenue team values customers’ wants and company communication for. We are able to do your tailored get to fulfill your own satisfactory! Our organization sets up several departments, including manufacturing department, sales department, high quality control department and sevice center, etc. Specification Faucet Type Bathroom Sink Faucets, Installation Type Centerset, Installation Holes One Hole, Number of Handles Single Handle, ... -
Rapid Delivery for Double Plate Heat Exchanger - ASTM A179 U Bend Heat Exchangers Tube – Datang
● ASTM A179/ ASME SA179; ● ASTM A213/ ASME SA 213, T11, T22, T22, T5; ● ASTM A213/ ASME SA213, TP304/304L, TP316/316L, S31803, S32205, S32750, S32760, TP410; ● ASTM B111, C44300, C68700, C70600, C71500; ● ASTM B338, GR.1, GR.2. ● Monel Alloys. ● Nickel Alloys. ● U Bend Dimension capability. ● Tube OD.: 12.7mm-38.1mm. ● Tube Thickness: 1.25mm-6mm. ● Bending Radius: Min.1.5 x OD/ Max. 1250mm. ● U tube Straight “leg” Length: Max. 12500mm. ● Straight tube before U bending: Max. 27000mm. U Bend Tu... -
Hot Selling for Fin Tube Extrusion - Elliptical Fin Tube With Rectangular Fins Oval Tube – Datang
● Tube outside diameter 8.0–50.0 mm ● Fin outside diameter 17.0 –80.0 mm ● Fin pitch 5 –13 fin/inch ● Fin height 5.0 –17 mm ● Fin thickness 0.4 – 1.0 mm ● Maximum tube lengths 12.0 m The cold and hot fluid walls are cross-flow heat exchange, and the tube is filled with refrigerant and air outside. The main body of the tube is phase change heat transfer. The tube is generally arranged in a serpentine shape with multiple tubes, and the fins are divided into single, double or multi-row structure... -
Manufacturer of Tube-Fin Heat Exchangers - T-Type High Efficient Heat Exchange Finned Tube – Datang
● Bare tube general material: Carbon Steel, Copper, Stainless Steel, Alloy ● Bare tube OD: 10-38mm ● Fin pitch: 0.6-2mm ● Fin height: <1.6mm ● Fin thickness: ~0.3mm T fin tube is a kind of high efficient heat exchange tube that is made by rolling processing and molding of the light pipe. Its structure characteristic is forming a series of spiral ring T tunnel on the outside the pipe surface. The medium outside the pipe forms a series of bubbles in the tunnel nuclear when heated. And becaus... -
Hot-selling Exchanger Tube - Elliptical Fin Tube With Rectangular Fins Oval Tube – Datang
● Tube outside diameter 8.0–50.0 mm ● Fin outside diameter 17.0 –80.0 mm ● Fin pitch 5 –13 fin/inch ● Fin height 5.0 –17 mm ● Fin thickness 0.4 – 1.0 mm ● Maximum tube lengths 12.0 m The cold and hot fluid walls are cross-flow heat exchange, and the tube is filled with refrigerant and air outside. The main body of the tube is phase change heat transfer. The tube is generally arranged in a serpentine shape with multiple tubes, and the fins are divided into single, double or multi-row structure... -
Factory Supply Fin Tube Exchanger - Elliptical Fin Tube With Rectangular Fins Oval Tube – Datang
● Tube outside diameter 8.0–50.0 mm ● Fin outside diameter 17.0 –80.0 mm ● Fin pitch 5 –13 fin/inch ● Fin height 5.0 –17 mm ● Fin thickness 0.4 – 1.0 mm ● Maximum tube lengths 12.0 m The cold and hot fluid walls are cross-flow heat exchange, and the tube is filled with refrigerant and air outside. The main body of the tube is phase change heat transfer. The tube is generally arranged in a serpentine shape with multiple tubes, and the fins are divided into single, double or multi-row structure... -
Factory Cheap Hot Double H Type Finned Tube - G Type Embedded Spiral Finned Tube – Datang
● Bare tube general material: Copper, Alloy, Carbon Steel, Stainless Steel ● Bare tube OD: 16-63mm ● Fin general material: Aluminum ● Fin pitch: 2.1-5.0mm ● Fin height: <17mm ● Fin thickness: ~0.4mm G type embedded spiral finned tube is processed from a certain width in the steel pipe and spiral groove depth, then inlays the ribbon on the steel pipe by the equipment. In winding process, as the pre-tightening force to a certain extent so the strip will be firmly in the spiral groo... -
Cheapest Price G Finned Tubes - ASTM A179 U Bend Heat Exchangers Tube – Datang
● ASTM A179/ ASME SA179; ● ASTM A213/ ASME SA 213, T11, T22, T22, T5; ● ASTM A213/ ASME SA213, TP304/304L, TP316/316L, S31803, S32205, S32750, S32760, TP410; ● ASTM B111, C44300, C68700, C70600, C71500; ● ASTM B338, GR.1, GR.2. ● Monel Alloys. ● Nickel Alloys. ● U Bend Dimension capability. ● Tube OD.: 12.7mm-38.1mm. ● Tube Thickness: 1.25mm-6mm. ● Bending Radius: Min.1.5 x OD/ Max. 1250mm. ● U tube Straight “leg” Length: Max. 12500mm. ● Straight tube before U bending: Max. 27000mm. U Bend Tu... -
OEM Customized Drying Finned Tube - G Type Embedded Spiral Finned Tube – Datang
● Bare tube general material: Copper, Alloy, Carbon Steel, Stainless Steel ● Bare tube OD: 16-63mm ● Fin general material: Aluminum ● Fin pitch: 2.1-5.0mm ● Fin height: <17mm ● Fin thickness: ~0.4mm G type embedded spiral finned tube is processed from a certain width in the steel pipe and spiral groove depth, then inlays the ribbon on the steel pipe by the equipment. In winding process, as the pre-tightening force to a certain extent so the strip will be firmly in the spiral groo... -
2021 wholesale price Ll Type Finned Tube - Studded Finned Tube Energy-Efficient Heat Exchange Component – Datang
● Finned Tubes Outside Diameter: 1″ to 8″ ● Fin Thickness: 0.9 to 3mm ● Studded Tubes Outside Diameter: 60 to 220mm Steel studded tubes are used instead of finned tubes for heat transfer in the petrochemical industry, generally in furnaces and boilers where the surface is exposed to a very corrosive environment and where very dirty gas streams require frequent or aggressive cleaning. Studded tubes are a type of metal tubes. These tubes have studs welded onto the metal tube. These ... -
Reliable Supplier Finned Tube Heaer - ASTM A179 U Bend Heat Exchangers Tube – Datang
● ASTM A179/ ASME SA179; ● ASTM A213/ ASME SA 213, T11, T22, T22, T5; ● ASTM A213/ ASME SA213, TP304/304L, TP316/316L, S31803, S32205, S32750, S32760, TP410; ● ASTM B111, C44300, C68700, C70600, C71500; ● ASTM B338, GR.1, GR.2. ● Monel Alloys. ● Nickel Alloys. ● U Bend Dimension capability. ● Tube OD.: 12.7mm-38.1mm. ● Tube Thickness: 1.25mm-6mm. ● Bending Radius: Min.1.5 x OD/ Max. 1250mm. ● U tube Straight “leg” Length: Max. 12500mm. ● Straight tube before U bending: Max. 27000mm. U Bend Tu... -
One of Hottest for Finned Tube Cooler - ASTM A179 U Bend Heat Exchangers Tube – Datang
● ASTM A179/ ASME SA179; ● ASTM A213/ ASME SA 213, T11, T22, T22, T5; ● ASTM A213/ ASME SA213, TP304/304L, TP316/316L, S31803, S32205, S32750, S32760, TP410; ● ASTM B111, C44300, C68700, C70600, C71500; ● ASTM B338, GR.1, GR.2. ● Monel Alloys. ● Nickel Alloys. ● U Bend Dimension capability. ● Tube OD.: 12.7mm-38.1mm. ● Tube Thickness: 1.25mm-6mm. ● Bending Radius: Min.1.5 x OD/ Max. 1250mm. ● U tube Straight “leg” Length: Max. 12500mm. ● Straight tube before U bending: Max. 27000mm. U Bend Tu... -
Fixed Competitive Price 5 Inch Steel Tube - Laser Welding Finned Tube For Heat Exchanger – Datang
● Tube outside diameter 8.0–50.0 mm ● Fin outside diameter 17.0 –80.0 mm ● Fin pitch 5 –13 fin/inch ● Fin height 5.0 –17 mm ● Fin thickness 0.4 – 1.0 mm ● Maximum tube lengths 12.0 m The cold and hot fluid walls are cross-flow heat exchange, and the tube is filled with refrigerant and air outside. The main body of the tube is phase change heat transfer. The tube is generally arranged in a serpentine shape with multiple tubes, and the fins are divided into single, double or multi-row structur... -
One of Hottest for Economizer Finned Tubes - Sprial Welding Finned Tube(Helical Finned Tubes) – Datang
Helical Finned Tubes provide the designer with high thermal efficiency and compact design solutions for a whole range of heat exchangers where clean flue gases are encountered. Helical finned Tubes are manufactured in both Solid and Serrated win profiles. Helical Solid Finned Tubes are produced by helically wrapping continuous fin strip tube. The fin strip is wounded spirally onto the tube and welded continuously with a High Frequency Electrical process to the tube along the spiral root. The ... -
Factory For Cooling Fins For Copper Tubing - ASTM A179 U Bend Heat Exchangers Tube – Datang
● ASTM A179/ ASME SA179; ● ASTM A213/ ASME SA 213, T11, T22, T22, T5; ● ASTM A213/ ASME SA213, TP304/304L, TP316/316L, S31803, S32205, S32750, S32760, TP410; ● ASTM B111, C44300, C68700, C70600, C71500; ● ASTM B338, GR.1, GR.2. ● Monel Alloys. ● Nickel Alloys. ● U Bend Dimension capability. ● Tube OD.: 12.7mm-38.1mm. ● Tube Thickness: 1.25mm-6mm. ● Bending Radius: Min.1.5 x OD/ Max. 1250mm. ● U tube Straight “leg” Length: Max. 12500mm. ● Straight tube before U bending: Max. 27000mm. U Bend Tu... -
Excellent quality Fin Tubes For Heat Exchangers - Elliptical Fin Tube With Rectangular Fins Oval Tube – Datang
● Tube outside diameter 8.0–50.0 mm ● Fin outside diameter 17.0 –80.0 mm ● Fin pitch 5 –13 fin/inch ● Fin height 5.0 –17 mm ● Fin thickness 0.4 – 1.0 mm ● Maximum tube lengths 12.0 m The cold and hot fluid walls are cross-flow heat exchange, and the tube is filled with refrigerant and air outside. The main body of the tube is phase change heat transfer. The tube is generally arranged in a serpentine shape with multiple tubes, and the fins are divided into single, double or multi-row structure... -
Chinese wholesale Boiler Fin Tube - Laser Welding Finned Tube For Heat Exchanger – Datang
● Tube outside diameter 8.0–50.0 mm ● Fin outside diameter 17.0 –80.0 mm ● Fin pitch 5 –13 fin/inch ● Fin height 5.0 –17 mm ● Fin thickness 0.4 – 1.0 mm ● Maximum tube lengths 12.0 m The cold and hot fluid walls are cross-flow heat exchange, and the tube is filled with refrigerant and air outside. The main body of the tube is phase change heat transfer. The tube is generally arranged in a serpentine shape with multiple tubes, and the fins are divided into single, double or multi-row structur... -
2021 High quality L Type Finned Tube - Sprial Welding Finned Tube(Helical Finned Tubes) – Datang
Helical Finned Tubes provide the designer with high thermal efficiency and compact design solutions for a whole range of heat exchangers where clean flue gases are encountered. Helical finned Tubes are manufactured in both Solid and Serrated win profiles. Helical Solid Finned Tubes are produced by helically wrapping continuous fin strip tube. The fin strip is wounded spirally onto the tube and welded continuously with a High Frequency Electrical process to the tube along the spiral root. The ... -
Manufactur standard Finned Tube Radiator - G Type Finned Tube(Embedded Finned Tube) – Datang
Main industries in which the ‘G’ Fin Tubes find service are Process Chemical Plants, Refineries, Gas Processing Plants, Steel Plants, Power Plants, Fertilizer Manufacturing Plants, etc. Finned Tube—-G-Type Fintube / Embedded Fintube A spiraling groove zero.2-0.3 mm (0.008-0.012 in) is plowed into the surface of the base-tube wall such metal is just displaced, not removed. The metal fin is wound automatically into the groove beneath tension, once that the displace metal is rolled back o... -
OEM Factory for G Finned Tubes - Elliptical Fin Tube With Rectangular Fins Oval Tube – Datang
● Tube outside diameter 8.0–50.0 mm ● Fin outside diameter 17.0 –80.0 mm ● Fin pitch 5 –13 fin/inch ● Fin height 5.0 –17 mm ● Fin thickness 0.4 – 1.0 mm ● Maximum tube lengths 12.0 m The cold and hot fluid walls are cross-flow heat exchange, and the tube is filled with refrigerant and air outside. The main body of the tube is phase change heat transfer. The tube is generally arranged in a serpentine shape with multiple tubes, and the fins are divided into single, double or multi-row structure... -
Hot sale Fin Tube Radiant Heat - Elliptical Fin Tube With Rectangular Fins Oval Tube – Datang
● Tube outside diameter 8.0–50.0 mm ● Fin outside diameter 17.0 –80.0 mm ● Fin pitch 5 –13 fin/inch ● Fin height 5.0 –17 mm ● Fin thickness 0.4 – 1.0 mm ● Maximum tube lengths 12.0 m The cold and hot fluid walls are cross-flow heat exchange, and the tube is filled with refrigerant and air outside. The main body of the tube is phase change heat transfer. The tube is generally arranged in a serpentine shape with multiple tubes, and the fins are divided into single, double or multi-row structure...